The validity of the Gammarus:Asellus ratio as an index of organic pollution: abiotic and biotic influences.

In freshwaters. Gammarus spp. are more sensitive to organic pollution than Asellus spp. and the relative abundance of the two taxa has been proposed as a pollution index. We tested the validity of this by examining the relationship between the Gammarus: Asellus (G : A) ratio and (1) a suite of physico-chemical variables. (2) established biotic (average score per taxon, ASPT) and richness (species richness (S) and Ephemeroptera, Plecoptera and Trichoptera families richness (EPT family richness)) indices generated from the macroinvertebrate community. In addition, we investigated a suspected biotic interaction, predation, between Gammarus and Asellus. Both univariate and multivariate analyses showed that the G: A ratio was sometimes responsive to changes in parameters linked to organic pollution, such as BOD5 and nitrate levels. However, the G : A ratio also appeared responsive to variables not directly linked to organic pollution, such as conductivity and distance from source. There were significant positive correlations among the G : A ratio and the ASPT, S and EPT, indicating that changes in the relative abundances of Gammarus and Asellus were reflected in changes in the pollution sensitivity and richness of the wider macroinvertebrate community. A laboratory experiment revealed significant predation of Asellus aquaticus juveniles by Gammarus duebeni celticus adults, but no reciprocal predation. We propose that the G: A ratio may be useful as a crude measure of organic pollution that could supplement more complex indices in a multimetric approach to pollution monitoring or be used for monitoring individual sites, where a simple technique is required for monitoring purposes over a period of time. Also, we urge recognition of the possible role of biotic interactions among taxa used in the generation of pollution indices.     

Pseudorandomness of Basic Structures in the Block Cipher KASUMI

The notion of pseudorandomness is the theoretical foundation on which to consider the soundness of a basic structure used in some block ciphers. We examine the pseudorandomness of the block cipher KASUMI, which will be used in the next‐generation cellular phones. First, we prove that the four‐round unbalanced MISTY‐type transformation is pseudorandom in order to illustrate the pseudorandomness of the inside round function FI of KASUMI under an adaptive distinguisher model. Second, we show that the three‐round KASUMI‐like structure is not pseudorandom but the four‐round KASUMI‐like structure is pseudorandom under a non‐adaptive distinguisher model.     

The PBD-Closure of Constant-Composition Codes

We show an interesting pairwise balanced design (PBD)-closure result for the set of lengths of constant-composition codes whose distance and size meet certain conditions. A consequence of this PBD-closure result is that the size of optimal constant-composition codes can be determined for infinite families of parameter sets from just a single example of an optimal code. As an application, the sizes of several infinite families of optimal constant-composition codes are derived. In particular, the problem of determining the size of optimal constant-composition codes having distance four and weight three is solved for all lengths sufficiently large. This problem was previously unresolved for odd lengths, except for lengths seven and eleven.     

Parallel triangulation of a polygon in two calls to the trapezoidal map

We give a parallel method for triangulating a simple polygon by two (parallel) calls to the trapezoidal map computation. The method is simpler and more elegant than previous methods. Along the way we obtain an interesting partition of one-sided monotone polygons. Using the best-known trapezoidal map algorithm, ours run in timeO(logn) usingO(n) CREW PRAM processors.     

Optimization and evaluation of reduced graphene oxide hydrogel composite as a demulsifier for heavy crude oil-in-water emulsion

The rising production of produced water from oilfields had been proven to bring detrimental environmental effects. In this study, an efficient, recyclable, and environmental-friendly reduced graphene oxide immobilized κ-Carrageenan hydrogel composite(κCa GO) was fabricated as an alternative sorbent for crude oil-in-water demulsification. Polyethyleneimine(PEI) was employed to form a stable hydrogel composite. The conditions for the immobilization of graphene oxide(GO) on PEI-modified κ-Carrageenan(κC) beads were optimized appropriately. An immobilization yield of 77% was attained at 2% PEI, 2 h immobilization activation time, and p H6.5. Moreover, the synthesized κCa GO is capable of demulsification with an average demulsification efficiency of 70%. It was found that the demulsification efficiency increases with salinity and κCa GO dosage, and it deteriorates under alkaline condition. These phenomena can be attributed to the interfacial interactions between κCa GO and the emulsion. Furthermore, the κCa GO can be recycled to use for up to six cycles without significant leaching and degradation. As such, the synthesized κCa GO could be further developed as a potential sorbent substitute for the separation of crude oil from produced water.     

Synthesis,structure, and characterization of the thorium zirconolite CaZr1-xThxTi2O7 system

A series of zirconolite ceramics with composition CaZr_1-xTh_xTi₂O₇ (Δx = 0.10) were reactively sintered at 1350°C for 20 h, in air (0 ≤ x ≤ 0.60) and 5% H₂/N₂ (0 ≤ x ≤ 0.40). A sample with composition corresponding to x = 0.20 was also produced by hot isostatic pressing (HIP) at 1300°C and 100 MPa for 4 hours. Th⁴⁺ immobilization was most readily achieved under oxidizing conditions, with Th⁴⁺ preferentially incorporated within a pyrochlore-structured phase in the range 0.10 ≤ x ≤ 0.50, yet formation of the zirconolite-4M polytype was not observed. We report the novel synthesis of single-phase pyrochlore with nominal composition CaZr_0.40Th_0.60Ti₂O₇ when targeting x = 0.60. Th⁴⁺ incorporation under reducing conditions produced a secondary Th-bearing perovskite, comprising 24.2 ± 0.6 wt% of the phase assemblage when targeting x = 0.40, alongside 8.8 ± 0.3 wt% undigested ThO₂. Under reducing conditions, powder XRD data were consistent with zirconolite adopting the 3T polytype structure. The sample produced by HIP presented a nonequilibrium phase assemblage, yielding a major phase of zirconolite-2M alongside accessory Th⁴⁺-bearing phases ThTi₂O₆, ThO₂, and perovskite. These data highlight the efficacy of Th⁴⁺ as a Pu⁴⁺ surrogate, with implications for the formation of Zr-stabilized Th-pyrochlore phases as matrices for waste with elevated Th⁴⁺ content.     

The lesbian,gay, bisexual and transgender community online: discussions of bullying and self-disclosure in YouTube videos

Computer-mediated communication has become a popular platform for identity construction and experimentation as well as social interaction for those who identify as lesbian, gay, bisexual or transgender (LGBT). The creation of user-generated videos has allowed content creators to share experiences on LGBT topics. With bullying becoming more common amongst LGBT youth, it is important to obtain a greater understanding of this phenomenon. In our study, we report on the analysis of 151 YouTube videos which were identified as having LGBT- and bullying-related content. The analysis reveals how content creators openly disclose personal information about themselves and their experiences in a non-anonymous rhetoric with an unknown public. These disclosures could indicate a desire to seek friendship, support and provide empathy.     

Experimental dynamic characterizations and modelling of disk vibrations for HDDs

Currently, the rotational speed of spindle motors in HDDs (Hard-Disk Drives) are increasing to improve high data throughput and decrease rotational latency for ultra-high data transfer rates. However, the disk platters are excited to vibrate at their natural frequencies due to higher air-flow excitation as well as eccentricities and imbalances in the disk-spindle assembly. These factors contribute directly to TMR (Track Mis-Registration) which limits achievable high recording density essential for future mobile HDDs. In this paper, the natural mode shapes of an annular disk mounted on a spindle motor used in current HDDs are characterized using FEM (Finite Element Methods) analysis and verified with SLDV (Scanning Laser Doppler Vibrometer) measurements. The identified vibration frequencies and amplitudes of the disk ODS (Operating Deflection Shapes) at corresponding disk mode shapes are modelled as repeatable disturbance components for servo compensation in HDDs. Our experimental results show that the SLDV measurements are accurate in capturing static disk mode shapes without the need for intricate air-flow aero-elastic models, and the proposed disk ODS vibration model correlates well with experimental measurements from a LDV.     

Sub‐Micron Anisotropic InP‐based III–V Semiconductor Material Deep Etching for On‐Chip Laser Photonics Devices

Two InP‐based III–V semiconductor etching recipes are presented for fabrication of on‐chip laser photonic devices. Using inductively coupled plasma system with a methane free gas chemistry of chlorine and nitrogen at a high substrate temperature of 250 °C, high aspect ratio, anisotropic InP‐based nano‐structures are etched. Scanning electron microscopy images show vertical sidewall profile of 90° ± 3°, with aspect ratio as high as 10. Atomic Force microscopy measures a smooth sidewall roughness root‐mean‐square of 2.60 nm over a 3 × 3 μm scan area. The smallest feature size etched in this work is a nano‐ring with inner diameter of 240 nm. The etching recipe and critical factors such as chamber pressure and the carrier plate effect are discussed. The second recipe is of low temperature (?10 °C) using Cl₂ and BCl₃ chemistry. This recipe is useful for etching large areas of III–V to reveal the underlying substrate. The availability of these two recipes has created a flexible III–V etching platform for fabrication of on‐chip laser photonic devices. As an application example, anisotropic InP‐based waveguides of 3 μm width are fabricated using the Cl₂ and N₂ etch recipe and waveguide loss of 4.5 dB mm^?1 is obtained.